• TEL

  • 0580-8050141
  • 0580-8230057
Add: Xihou Industrial Park, Jintang Town, Zhoushan City, Zhejiang, China
Tel: +86-580-8230057
Fax: +86-580-8053150
Mobile: +86-15958096992
Email: sales@jlscrew.com
            tracy@jlscrew.com
the heating temperature setting
date:2013/8/268
a, so stay in the barrel and screw the screw rotation chilled molten plastic in order to facilitate and provide molten plastic to obtain the necessary part of the heat;
b, set the temperature lower than the melt 5 \ '10 ℃ ​​(provided in part by the friction heat);
c, the adjustment of the nozzle temperature can also be used to control salivation, condensed material (plug Tsui), pull wire and other issues;
d, crystalline plastics are generally temperature control:

Plastic types
 Barrel temperature ℃
 Injection Pressure kgf/cm2
 
HDPE (High Density Polyethylene)
 180 \ '210
 500 \ '1500
 
PP (polypropylene)
 200 \ '270
 400 \ '1000
 
PA6 (Nylon 6)
 225 \ '280
 700 \ '1000
 
PA66 (nylon 66)
 260 \ '280
 600 \ '1500
 

e, non-crystalline plastic

Plastic types
 Barrel temperature ℃
 Injection pressure kgf/cm2
 
PS (polystyrene)
 180 \ '240
 400 \ '1300
 
ABS (acrylonitrile butadiene styrene)
 200 \ '230
 800 \ '1500
 
PMMA (polymethyl methacrylate)
 180 \ '220
 700 \ '1500
 
PC (polycarbonate)
 260 \ '310
 800 \ '1500
 
Modified PPO (Noryl)
 240 \ '280
 850 \ '1400
 
Rigid PVC (rigid PVC)
 165 \ '185
 1000 \ '1500
 

Note: a, do not add more to the non-glass fiber reinforced plastic.

b, the barrel melt temperature is usually higher than the tube outside the control of the temperature.
Home  |  About us  |  Products Center  |  News Center  |  Online Messages  |  Contact Us